Details that make us different: Here you can see a typical floor (of almost all the ice rinks that are offered), rubber (EPDM), which can be white or black, it does not matter. It is punctured and has losses of the cooling solution, because the material is stressed by temperatures. Pay attention that it is mounted directly on the ground, wasting energy, and the barriers rest on the rubber and are supported only by the ice.
Nor is there anything that contains the water that will certainly come out from under the fences, before the least thawing.
Off-rink collectors: In one of the two headers, other companies that offer ice rinks locate the collectors, which do nothing but freeze the air, and waste energy uselessly. In general, they cover them so they can not be seen, but the ice grows without stopping and there are cases that lift the same covers.
Off-rink collectors: In one of the two headers, other companies that offer ice rinks locate the collectors, which do nothing but freeze the air, and waste energy uselessly. In general, they cover them so they can not be seen, but the ice grows without stopping and there are cases that lift the same covers.
Please take a look the untidiness of the result.
Off-rink collectors: In the other header, the rubber rolls that "exceed" the length of the ice rink. They also freeze uselessly, waste energy and only cover them with a wooden box so that they can not be seen.
Also note that the barriers are only supported on the rubber, without fixings of any kind, except that the ice contains them.
But what if it melts?
Pipes without isolation: Another reason to lose energy and money in electricity.
The tubes that connect the machinery to the ice rink are not thermally insulated, which will produce an endless layer of ice on itself, which can melt in water if the sun strikes it directly. Please check the wet floor.
Scruff and waste energy.
You are the one who will pay the consequences ... in money and in a mediocre event.
Quick assembly: These photos have been taken in a first class shopping center.
The ice rink was set up in 3 days and these are the results.
The barriers tied with wires to each other and twisted, the panels with glue, loose in several places, and in areas where the rink's floor does not freeze, simply sand.
So that you do not see the disaster below, a little synthetic turf fixes everything ...
This really is an extreme: such a thing is unacceptable, but someone have paid for it.
It is you who have the option to choose the best technology and work with a company that has more than 15 years of experience and hundreds of ice rinks installed.
Not everything is a matter of price, we speak of technological excellence, deep knowledge and totally professional work.